The foot pedal switch generally has three terminals, we only need to connect the two phase wires to the normally open and common terminals. We introduce the live wire of the power supply to the public terminal of the foot switch, and then lead the live wire from the normally open terminal to the live wire terminal of the motor.
First, What is the wiring method of the foot pedal switch
The foot switch generally has three terminals, we only need to connect the two phase wires to the normally open and common terminals. We introduce the live wire of the power supply to the public terminal of the foot switch, and then lead the live wire from the normally open terminal to the live wire terminal of the motor.
Second, what are the wiring skills of the switch socket
1. When we connect the switch socket, we must first understand the connection method of the switch socket. For example, when wiring a five-hole switch socket, whether it is connected according to the switch control socket or the switch control lamp and so on. Everyone should determine the wiring method of the switch socket according to the circuit design plan.
2.When wiring the switch socket, multiple wires are usually reserved at the switch socket. If the colors of these wires are the same, when we can’t distinguish whether the wires are phase wires or neutral wires, we can use tools such as electric pens to measure and distinguish. After determining the type of wire, connect it to the corresponding connection port of the switch socket. Generally, the terminal of the switch socket will have wiring marks such as L and N.
3.When wiring the switch socket, we need to peel off a part of the wire insulation and then connect it to the terminal. If the wire insulation is peeled off too much and the copper core of the wire is exposed, you can wrap it with electrical tape. After the wire is connected, we can gently pull the wire to see if the wire will fall off the terminal and so on. After the switch socket wires are connected, you can also use tools such as electric pens to check whether the circuit is unblocked, whether the switch socket can be used normally, and so on.
